|
04-30-2019, 09:44 AM | #1 |
Guest
Posts: n/a
|
High concentration compounds
Quick question or two:
I've never pinned anything in a really high concentration before, now have T cyp in a 550... first pin I was conservative choosing to go .5 ml so 225 figured I'd pin every 3rd day trying to even out what's available at about 400... 1) is that proper thinking? 2) with the higher concentration do you guys use it to pin a smaller dart so the bubble isn't as big? 3) do you pin less often figuring you good with the longer half life? 4) if you pin less often do you feel an "up and down" as the concentration changes in your system while the compound is on the reduction side of the curve? 5) does the concentration have any bearing on the ancillaries you take? Thank you for taking the time! A1 Last edited by A1food4u; 04-30-2019 at 09:47 AM.. |
04-30-2019, 10:43 AM | #2 |
Administrator
Join Date: Nov 2003
Location: Cimmeria
Posts: 18,388
|
I always mix the higher concentration drugs with something else i.e. EQ. Regardless of concentration depending on ester the halflife remains the same. Once pinned 500mgs equals 500mgs no matter how much per ml.
__________________
ADMIN/OWNER@Peak-Muscle |
04-30-2019, 12:58 PM | #3 |
Guest
Posts: n/a
|
But I thought that based on half life the compound takes on the classic bell curve... starting low until absorbed hitting peak availability at half life then down the other side. And that the idea was to pin often enough so the new dart is timed to flatten out that curve by keeping more readily available at closer to the peak of the curve?
If my thinking is incorrect please explain so I can learn.... Thanks |
04-30-2019, 01:08 PM | #4 |
VET
Join Date: Feb 2017
Posts: 1,991
|
It will depend on the halflife of the compounds but it kinda defeats the purpose of high concentrations if you inject constantly with small mg. I would figure out how much you want in you system per 7-10 days and inject once in 7 - 10 days keeping track of you long lasting esters that will climb. I don't like HC compounds myself and would also take Lifts advice to include some EQ or Deca
__________________
The older I get the better I used to be. |
04-30-2019, 03:31 PM | #5 | |
Administrator
Join Date: Nov 2003
Location: Cimmeria
Posts: 18,388
|
Quote:
__________________
ADMIN/OWNER@Peak-Muscle |
|
04-30-2019, 07:31 PM | #6 |
Guest
Posts: n/a
|
A1 I can tell you over the years I have pinned cyp 2x ew, 1x ew, 1x e10days, and tbh I didn't notice one bit of a difference. No extra sides, results the same, blah blah blah. All that stuff is more important when running a prop or acetate ester, which you wanna pin frequently. But with cyp, it allows for a lot of play.
|
04-30-2019, 07:39 PM | #7 |
Guest
Posts: n/a
|
Also if you're shooting for 400mg ew, .7ml is about as close as you can get at 385mg. So you can just poke .7ml once ew, or if you wanna split it into 2 injects, do .4ml and .3ml. If you wanna half it exact at .35ml each, you will prolly need to use a slin pin to be that exact. Btw you mentioned 225mg above for .5ml, but it's actually 275mg (half of 550 is 275).
|
05-01-2019, 10:27 AM | #8 |
Guest
Posts: n/a
|
Thanks everyone!
Yup Hank, just sloppy math on my part 275 in a .5 ml for sure |
07-14-2019, 07:12 AM | #9 |
Moderator
Join Date: Feb 2018
Posts: 292
|
I shoot 500 mg test once a week...suits me just fine.
|
07-15-2019, 12:54 PM | #10 |
Guest
Posts: n/a
|
Thanks Guys!!
|
Thread Tools | |
Display Modes | |
|
|